Quote:
Originally Posted by napaCCW
For whatever reason I dont always engage it do I need more of a death grip? Maybe. And I did install it myself it was the tactical grip safety from kimber and it seemed to drop right in.
|
You should not need a death grip to disengage the GS. The grip safety can be adjusted to make it more "sensitive". Here is what you can do to see just how "sensitive" it is right now.
Drop the mag and check for a clear chamber.
First check just how much travel you have with the grip safety. You can do that with a pencil mark along the back strap with the grip safety pushed all the way in.
Now, with an empty gun pointed in a safe direction, cock the hammer and lower the manual safety. Gently pull the trigger and it will be stopped by the grip safety. Now push on the grip safety with your fingers slowly until the trigger moves and the hammer drops. Now you know how far the GS need to travel to disengage.
If it is almost at the end of its travel, it can be made more sensitive. However, I cannot tell you how to do that since there are many variables to consider.