From the Kimber manual:
http://www.kimberamerica.com/downloa...Fullsize45.pdf
(page 28)
LUBRICATION
1. Use a High Tech Gun Oil such as Shooters
Choice FP-10 or similar quality oil (grease is
not recommended). If oil contains Teflon be
sure to shake well before using as the Teflon
settles when left overnight.
2. Lubricate the following internal parts of the pistol:
a. Slide and Frame rails - Oil. Do not over oil!
b. Disconnector on top of frame - Small drop.
c. Barrel Hood - two drops, spread on hood.
d. Barrel Locking lugs inside Slide and on
Barrel - one drop on each lug.
e. Barrel Link - one drop behind link.
f. Slide Stop pin - one drop, spread with finger.
g. Outside of Barrel - Oil. Do not over oil,
spread with fingertip.
h. Cock Hammer - one drop in between the
hammer and frame.
i. Assemble gun. Rack the Slide 5-6 times,
dry fire, wipe off excess oil from gun.
j. Make sure, if you have stored the gun with
oil in the barrel and chamber, that you run
a dry patch through the barrel to clear it of
the oil before you fire the gun.